Putting a new roof on your house is a job you want to contract out.
It’s specialty work that can also be dangerous if you don’t know what you’re doing.
Jamison Brown, a home inspector with Amerispec Home Inspection Service, in Virginia, offers these tips:
- Get a good contractor: Always choose a licensed roofing contractor, not a general remodeling contractor. A remodeling specialist subcontracts the work out, and that opens a can of worms, Brown said.
- Get a permit: Require the roofing contractor to take out a permit to make sure the roof complies with local code standards.
- Get good result: Have the original shingles and roofing felt, called underlayment, torn off and go with a total replacement.
- Get a good foundation: For roofing felt under your shingles, you can go with 15 or 30 pound. Seal siding walls, valleys and penetrations with a water-resistant membrane such as Ice and Watershield.
- Get quality shingles: If you go with the standard three-tab asphalt shingles, choose 25-year shingles that resist the growth of roof algae, which is a dark brown or black stain that affects many parts of the coun-try. If you go with laminated or architectural shingles, choose at least a 30-year shingle. Require your contractor to use nails, not staples, to secure the shingles.
- Get better pipe collars: -Standard collars around plumbing vents extending out of your roof often wear out before the roof is five to 10 years old. Ask your roofing contractor whether better options are available.
- Get it inspected: For about $150, a certified home inspector can make sure your roof was installed according to code and contract.
This article from Tribune Company news outlets has been republished for additional education purposes. Please note that this editorial content was produced by Tribune news staff who are not employed by ForSaleByOwner.com or by Tribune Digital Marketplaces. This article is not affiliated with any links or products that appear on the on the same pages. Read more about our editorial policy.